Tag: wood deck

What are Hidden Deck Fasteners? – Building Decks With No Screws Showing

When you go through the effort of constructing your deck you deserve to have it look amazing. How exactly do deck fasteners affect the look of your deck? The visible screws ruin the sight of your deck and rust over time. Thankfully, you do have another option today: hidden deck fasteners.

Hidden deck fasteners secure your deck boards to the joists of the deck but instead of being installed from the top of the boards, as screws on their own would have to be, they are installed from the bottom and/or sides of the board so that the screws don’t show.

In today’s article, we’ll look at how you can stop building decks with the screws all over the deck, how to use hidden fasteners, what you can use them for, and other deck securing options available to you.

How do You Build a Deck Without Screws Showing?

We know you aren’t wondering what the big deal is about getting rid of screws on your deck because you’re reading this article. Screws, which looked okay on a deck after it was first built, will,

Rust over time
Cause boards to crack
Catch on socks
And make it very difficult to remove or remodel the deck after rusting

For these reasons, you’re looking for a different fastening solution from the start of the project and the best alternative solution you’re looking for is hidden fasteners.

Hidden fasteners accomplish the goal of securing the deck boards to the joists while being totally invisible. They come in a variety of shapes and sizes, but they all work by being attached underneath and/or on the sides of the deck boards. They will either hide the screws with plugs that match the deck’s material or with clips that clip onto the grooves on the sides of the boards.

There are several benefits to having hidden clips.

Because of their placement, they allow the boards to expand and construct without cracking.
Since they’re hidden, you don’t have to worry about painting the screws to match the deck.
Even if they are placed somewhere they could be seen, they come in a variety of colors so that they are unobtrusive.

These fasteners will spare you the trouble of predrilling your deck boards too. Now, there are screws today that are coated to prevent corrosion and are made to bend to prevent cracks a little longer, but they are twice or even three times more expensive than regular deck screws.

How do You Install Decking with Hidden Fasteners?

The process of using hidden clips is definitely more time-consuming than installing the screws directly through the boards on top, but it’s still fairly straightforward. What’s important is to match the right hidden fastener with the decking brand. This section will be for those who have already constructed the joists and frame of the deck and are ready to install the deck boards.

For example, if you have a TimberTech composite deck, it would have been constructed with TimberTech’s hidden fasteners exclusively because they only fit the company’s deck board grooves. It’s the same with other decking brands. The steps are as follows and we’ll take TimberTech’s composite deck options as our examples for them.

Choose the Right Hidden Fasteners

The choice of fastener depends on which profile your deck boards are: grooved or square. TimberTech has three decking options: Edge, Pro, and Azek. Each has their own collection. Select the collection and option under the collection that you want and then scroll down to the “options & dimensions” tab. See if the options come as square-shouldered or grooved.

If you have grooved boards, you have your choice of hidden fasteners according to the board choice you wanted. If they are square-shouldered, they lend themselves more to the classic top-down fasteners or the color-matching screws and plugs.

The hidden fasteners (H.F.s )that fit all TimberTech grooved decking are

The CONCEALoc H.F.
The CONCEALoc L-brackets (for the first and last boards)
The FUSIONLoc H.F.

The H.F.s that fit Azek boards are:

CORTEX for Azek
SIDELoc

The H.F.s that fit the Pro boards are:

CORTEX for Pro & Edge

The H.F.s that fit the Edge boards are:

CORTEX for Pro & Edge

Once you’ve determined which fastener you need, the rule of thumb on the quantity for hidden fasteners is 175 pieces per 100 square feet of decking.

Install the First Board

Now that you have your fasteners, take your first grooved board and attach it to the joists with your L-brackets. These brackets can also be used for butt seams to minimize the need for sister joints. Begin at one edge of your deck with a grooved board and make the board flush with the edge.

Install Your First Fasteners

With your first board secured against the brackets, slide your fasteners into the groove on the side facing your house, making sure each clip is centered on the joists. Drill in the screws until they’re flush with the clip and slide in the next board. There should be a ¼” space between boards.

Repeat & Finish

Repeat this process with each board until you reach the last one. On the last board, attach it to the clips of the previous board like you’ve been doing, and then fasten it with the L-brackets to finish.

Are There Hidden Fasteners for Wood Decking?

Absolutely! Wood decks have the same hidden fastener choices as composites do:

Plugs hiding the screws
Clip fasteners

The problem with wood decks is that hidden fasteners are generally made for premium hardwoods instead of softwoods or pressure-treated wood whereas composite decks have more of a variety of fasteners to choose from.

Lastly, a wooden deck, even with the best fasteners available, won’t last as long as a composite deck will. Wooden decks will typically last 10-15 years with good maintenance, while composites can last as long as 50 years!

How do You Install Composite Decking Without Hidden Fasteners?

If you chose a square-shouldered board design, you can opt for plugs. Plugs require small circles made from the same material and color as your deck, but do not require pre-drilled holes or placing the boards down one at a time.

The way they work is,

Using a drill bit, drill the screws into the joists from the top-down
Clear away the debris and place the plugs on top of the holes.
Hammer in the plugs

It’s very straight-forward. The only thing you need to know is where to find the plugs. TimberTech’s CORTEX for Pro & Edge is an example of a plug fastener and to get the plugs you need, you just have to click on the color of your deck. As for the Azek series there is no available plug system but they do have TOPLocs which are screws with colored and rounded heads that are coated to prevent rust.

As you can see, the TOPLocs are pretty much the same thing as the typical top-down fastening method, with some useful touches. Ultimately, if hidden clips are not what you want to use, but you still want the clean look and smooth surface, you should use the plug fastener method.

In Short…

You now have a good understanding of what hidden deck fasteners are and why they are so useful. You even have some options to look at if you still want the clean look but don’t care for hidden clips. Whatever your preference or means, there is something for everyone’s dream deck.

If you live in the Northern Colorado / Southern Wyoming area and would like to schedule a free consultation to talk to one of our TNT team members about your deck project, then give us a call today at 970-663-2868 or visit the deck services page and fill out the contact form.

What is IPE Decking?

Decks have become increasingly popular in the United States because upon their construction, a homeowner not only adds function and appeal to their outdoor space but quite literally takes their living quarters from the inside to the outside of their home. However, you may be wondering how Ipe decking stands up to its competitors and if it’s a worthy choice over its competition.

Ipe decking is environmentally unfriendly and notably expensive. While its aesthetically pleasing amber tones and desirable density make it one of the most sought-after, wooden decking options, the harvesting of Ipe trees has caused problems with deforestation and greenhouse gas emissions.

An Ipe tree takes 100 years to mature, so once an Ipe tree is harvested, neither you nor your children may ever see its seedling come to full growth! In this article, I discuss an excellent and environmentally friendly alternative to Ipe decking. I also review outdoor upgrades like patio covers and window frames. Read on for comparisons and useful, home-improvement information.

Should You Purchase IPE Decking?

At TNT Home Improvements, we acknowledge that decks divide your yard and define your entertainment space. They can be as minimal or as lavish as you desire. However, there are four important factors to consider when choosing which products to construct your deck with. In the following table, I refer to these elements while comparing Ipe hardwood decking with TimberTech capped polymer deck boards:

	Average Cost of a 16’ by 20’ Deck	Average Cost of Maintenance of a 16’ by 20’ Deck Over 10 years	Longevity	Visual Appeal
Ipe Hardwood Decking	$11,764	$4,058	Eventually Deteriorates from Mold, Mildew, and Rot Growth	Fades and Warps due to the Properties of the Natural Wood
TimberTech Capped Polymer Deck Boards	$11,945	$1,100	Resistant to Moisture, Cracking, and Splintering	Stain-Resistant with Enduring Color

Ipe decking is made from natural wood and costs less per installation, which may certainly entice some buyers. However, TimberTech is made from composite, capped polymer, which lasts longer and has fewer maintenance costs over an extended period.

My first impression of TimberTech was that it was too good to be true, so I asked myself a few questions. Because TimberTech is made from capped polymer, will it dent or stain easily? Additionally, does TimberTech become slippery when wet or hot in direct sunlight? Upon conducting further research, I found that the answer to all of these questions was “no!”

Why IPE Decking Is Bad for the Environment

According to Greenpeace.org, forged documents often contribute to the illegal logging of Ipe trees in the Amazon, which leads to deforestation. In turn, deforestation results in irreversible environmental damage.

While there may be some other alternatives to Ipe that affect the environment less (for example, think of a bamboo tree, which only takes 3 months to 2 years to reach maturity), there is no such thing as a completely environmentally sustainable option that involves the demolishing of a healthy, thriving forest.

TimberTech’s Value and Effect on the Environment

Unlike Ipe decking or decks made from pressure-treated wood, TimberTech has taken strides to leave as limited of an impact on the environment as possible. The TimberTech AZEK Vintage Collection is made from high-performance polymers, which are primarily recycled. The following list describes the benefits of TimberTech decks when compared to other, leading wooden deck alternatives:

TimberTech decks are made from 100% high-performance, recyclable polymers: In time, we’ve simulated natural products by making them better. Wooden dentures have similarly been replaced by recyclable materials such as polymers. I think that now, it seems somewhat odd to look back when so much progress has been made.
Materials from TimberTech decks can be recycled after they are replaced: Related polymer products, like windows and siding, can also be safely recycled. When treated, painted, or stained, wooden decking cannot be recycled traditionally.
TimberTech’s AZEK Collection guarantees a 50-Year Limited Fade and Stain Warranty: Once your deck is set, TimberTech offers warranties ranging from 25 to 50 years, depending on whether the packages of Edge, Pro or AZEK are chosen.

With TimberTech decks, you set it and you forget it. This means that you will have more time to relax while entertaining family and friends. For at least 25 years, accidental spills from one’s grill will be of no concern to buyers of TimberTech. For more information concerning TimberTech and its competitors, you may view this DrDeck YouTube Video or TimberTech YouTube Video.

How to Know When to Upgrade Your Deck

If your deck becomes unsafe in any way, or if it is maintained poorly, it is likely time for an upgrade. Sometimes this means installing an entirely new deck (especially if your deck has rotted or deteriorated from mold, mildew, or insects). However, there’s good news! Insects cannot feast on decks that are made from capped polymer, which is the material that TimberTech decks are made from.

Installing Patio and Deck Covers

Awnings, and patio and deck covers aren’t necessary to preserve TimberTech decks because they are resistant to sunlight, moisture, cracking, splintering, and stains. Yet when installing Ipe decks or other decks made from natural woods, these attachments may prove beneficial.

Ipe is among the most resistant woods used in decking. For this reason, it’s an extremely practical option when installing wooden decks. However, it’s still no match for natural elements like sun, snow, and rain. TNT Home Improvements has considered this and offers premier services including but not limited to deck and pergola building, roofing, siding, and patio cover and window installation.

Amerimax Window Upgrades for Your House

When repairing the outside of one’s home and installing all-new window frames, you may want to consider a variety of options. An excellent example of a company that configures its windows to suit the needs of its buyers, is Amerimax. A variety of Amerimax window packages are available, which include:

The Craftsman Portrait Series: Windows in the Craftsman Portrait series possess fusion-welded frames, slim designs, and sliding window slashes for easy maintenance.
The Masters Grande Series: Like the Craftsman Portrait series, Masters Grande windows come in colors including but not limited to: white, desert sand, and sandalwood. It also contains a unique sash weep system so that its glass seal will not deteriorate.
The WinPro Series: WinPro windows are heavily reinforced with steel, a weather-stripping design, and rails for easy control.
The Aristocrat Casement Series: These all-new casements are meant to protect one’s home from the outside elements and include Amerimax’s tightest weather seal for steadfast durability, strength, and protection.

Amerimax windows can be customized with a variety of sizes, colors, and grids, and up to 11 options for glass paneling. Amerimax window frames look great by any deck but when repairing the outside of your home, you may ask: which siding will go best with my Ipe or TimberTech deck? Many contractors recommend Mastic siding because it comes in a variety of accents and with many accessories, materials, and options available.

Conclusion

TNT Home Improvements has been a locally owned and operated residential outdoor construction company since 2005. We are fully licensed, insured, and always have an engineer on-site to oversee all projects. If you live in the Northern Colorado or Southern Wyoming area, then give us a call today at (970) 663-2868.

Additionally, you may fill out our contact form to make an appointment and to discuss your next home improvement project. Upon consideration of which products to have installed, TNT Home Improvements will gladly accommodate any customer’s choice. Whether you choose to install Amerimax, Ipe, Mastic, or TimberTech, we will gladly cater to your needs.

composite decking deck deck builder deck contractor outdoor living space tnt deck wood deck

What to Know Before You Build a Deck

Now that Spring is heading our way, we’re excited to do those outdoor projects we promised ourselves we would do this year, like build a new deck. Hopefully, you’ve been planning for a while before now, but if you’re currently considering building a deck there are some things to figure out first.

Before building a deck, the homeowner or contractor should determine at least the deck zone requirements, size, level, foundation, preferred material, color(s), frame construction, guardrail requirements, deck maintenance, and total cost of the project.

In this article, we’ll provide some helpful advice and need-to-know information on all of these considerations, so read on.

Check Deck Regulations

There are two sets of regulations to be aware of: the Controlled Decking Zone (CDZ) code and the residential codes that apply to structures that are a part of a deck, such as railings.

The CDZ is where access to the zone is managed but there are no fall-prevention systems, such as nets, in place. This is the zone your deck will be in for the bulk of its construction. The requirements for working in a CDZ are:

You can be no more than 90 feet wide and 90 feet deep from any leading edge.
There must be no more than 3,000 square feet of unsecured decking.
There must be clearly marked boundaries with control lines or the equivalent.
You need to have safety deck attachments placed from the leading edge back to the control line. Two attachments for each metal decking panel you use.

Then you must make sure your deck plans are up to these residential code standards for railings, stairs, treads, footings, ledger boards, framing, etc.

They may differ for each HOA, but samples include, in the U.S., guardrails are required when a deck reaches 30” or higher above grade (above ground level) and ledger boards must be at least 2×8 in size. There are obviously more rules for each piece, the collection of which you can find here.

Decide on the Size

Thankfully, deck sizing doesn’t have a string of codes attached to it so the only question you need to ask is do You know how much square footage you want? This will probably be the easiest question for you to answer since you know the dimensions of your house and yard.

Once you’ve decided on the size of your deck you’ll have to calculate the amount of decking you’ll need to accomplish it. You can calculate this amount by,

Determine the total area of your deck (LxW)
Decide what board lengths you want to use
Calculate the board square footage
Divide your deck total area by your board total area
Determine the square footage of the deck spacing
Buy more than you need to account for mistakes and waste.

If you need more help to determine the amount of decking you will need, our partner, Timbertech, has a very helpful article that explains these steps in more detail.

Decide on the Level

Now you need to figure out if you want a ground-level deck or a raised deck? On the one hand, a ground-level deck is a lot easier to construct, it’s cheaper because it requires less effort and materials, you might not need a permit if you intend to do it yourself (double-check!), and if you have very young children, they’re usually much safer.

On the other hand, raised decks usually look much nicer, they give you, the owner, a better view of the scenery around you, and when they’re built well, the space created below can be used for storage.

So the deciding factors of this question seem to include the desired design and preferred function, but for many of you, you need a raised deck because your house sits on foundation walls that raise it above ground level. But, for the record, both can include a BBQ and/or bar area, no problem.

Decide on Your Foundation

Whether you choose a ground-level deck or a raised deck, you need to decide on what you’ll do for the foundation.

For ground-level decks, they will still need to be raised a bit to allow for ventilation, since you will have wet ground at some point. There is a minimum footing depth of 12 inches for ventilation purposes. Then, you can create a simple foundation with deck blocks, concrete blocks on a layer of gravel for better drainage, or anchor spikes.

For raised decks, you will need to choose between concrete footings, helical piers, and anchored footings. Generally, the footings are chosen for their superior security or for tall decks. Helical piers are good for shorter decks that are still higher than ground level. Whichever foundation you use, check throughout the process that it’s level.

Choose the Right Material Before You Build

This is the toughest decision you will probably make. There are pros and cons with each choice between redwood, pressure-treated lumber, and composite decking.

Plain wood tends to warp and become damaged more easily, but has a variety of color choices and can be sealed and maintained more easily.

Composite comes with a minimum 25-year warranty with TimberTech because it lasts for so long and requires minimal care.

Finally, pressure-treated wood is something in between, with more durability than the redwood, and less cost than composite, but it can easily warp as it goes through its drying process and requires restaining each year.

Choose Your Color Scheme

You may have thought you knew what color, or colors, you wanted to use but there are aspects of color choice that you might not have been aware of. For instance, your color options will be limited or expanded according to the deck material you chose. Generally wood will offer an almost unlimited color palette because it can be painted and stained.

Still, composite decking has expanded, at least where TimberTech is concerned, to include many stained wood hues as well as variations of black, gray, tan, and white.

Another thing you should consider is the temperature your summers tend to reach. High temperatures are more likely to warp dark colors instead of light colors because dark shades absorb more heat.

Calculate the Cost Before Construction

This may be the most important decision. Now that you have a virtually complete understanding of what it will take to construct your deck, you need to calculate the expenses.

How much will it cost to buy the lumber or composite you need? How much for the screws and lags? There’s also the concrete, potentially the stain or paint, the anchors and bolts, the cost of labor if you hire help, and more.

There are also the non-monetary costs. How long will this project take you if you do it yourself or hire a team of professionals? You should calculate at least two different scenarios: the total if you buy and do everything yourself, and the quotes of at least three contractors.

Deck Maintenance

Finally, before you break ground, you should understand the kind of maintenance that your deck will need. Even composite decks require some basic maintenance to prevent permanent stains, but all decks will eventually require such care as mopping, hand scrubbing, power washing, repainting or staining, and/or the replacement of warped, splintered, and broken boards.

Conclusion

Those were the most important things you need to know before building a deck to avoid unnecessary complications, but I can tell you there’s more to know, having constructed decks for more than a decade.So if you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or fill out the contact form on the deck services page to make an appointment to discuss your next home improvement project to find out EVERYTHING you need to know.

composite decking deck builder outdoor living space tnt home improvements wood deck

16 Valuable Deck Design Tips

A deck is a great addition to any home. It will give you a place to hang out with your friends and enjoy the fresh air. You can add a grill, creating an amazing outdoor cooking experience. Plus, you’ll be adding value to your home.

But you want to make sure that the deck will fit with your lifestyle. Because of this, you’ll need to make sure that you are designing it correctly. At first, this can be intimidating. Thankfully, there are lots of tips you can use to help you stay on the right track.

Think About How You Intend to Use the Deck

The best place to start is by thinking about the way that you want to use the deck. This will affect every other decision you make, as you want to create the most functional space. Some of the most popular reasons why people want to get a deck include:

Entertaining space
Outdoor dining space
Outdoor kitchen
A place to relax in the sunshine
Multi-purpose deck, combining all of these elements

This is the most fun part of the process. Think about your dream deck and what you will be doing on it. Will there be deck chairs to relax? Or are you planning to have a dining table and eat meals with your family?

During this time, it can help to have a look through social media for inspiration. Look at the decks that you like. Take note of the layout they are using. At this stage, you’re just looking to settle on the way the deck will be used. We can worry about specifics later.

It’s also a good idea to get a clear idea of how many people are going to be on the deck. Are you planning on huge parties? Or just a quiet get-together with a few friends? This will affect how large the deck will need to be.

Decide Where to Put the Deck

After you’ve decided that you are going to get a deck, the next question becomes where you are going to put it. This will often depend on the type of property you have. There are a few elements to consider when making this choice.

First, it’s a good idea to think about which side of the house you want the deck to go on. Sometimes, the positions of the doors will decide this aspect for you. At other times, you might have to consider adding a door. You will need to talk to your builder about the prospect of doing this.

It’s also a good idea to take a look at the surrounding landscape. Is there a spectacular view that you want to take advantage of? In this case, you might want to raise the deck for a better view.

Are there any trees or natural features? Just because a tree is growing in the area doesn’t mean that you can’t build a deck. You can put a hole in the middle of the deck for the tree to grow through. This can be a great way of getting some natural shade.

Getting the Right Deck Size

Now we can move into one of the most contentious issues, how large you want the deck to be. There is no hard and fast rule on deck sizing. But there are a few questions you can ask to find the right deck size.

How Will You Use the Deck?

This is the most important sizing element. If you want to get a deck for lounging and soaking up the sun, you might only need something relatively small. All you’ll need is space for some deckchairs and maybe a table for your drinks. On the other hand, if you want an entertaining space, you’ll need to get a bigger deck, so everyone will be able to fit.

As a general rule, it’s a good idea to give each person around 20 square feet of space. This will ensure that everyone can move around comfortably without bumping into each other.

What Furniture Will Be On the Deck?

Think about the type of furniture that will be on the deck and roughly how big the pieces will be. Also, consider any other items you want to include, like a grill. Online stores will tell you the dimensions in the product specifications, so you don’t need to carry around a tape measure.

General Sizing Rules

There are a few other things to keep in mind when deciding how big the deck will be. You often want to stick to a deck that is a maximum of 20 percent of the square footage of the house. This stops it from visually overwhelming the house.

Usually, a small deck will be eight feet by eight feet. The average is around 12 feet by 12 feet. Though, if you have the space, you can go bigger. For example, a 16 by 12-foot desk might be a good choice for those looking for a space to entertain guests. If in doubt, it’s best to get a larger deck. You won’t regret having a little extra room, but you will have problems if the deck is too small.

When deciding how big you want the deck to be, it’s best to consult with a professional. Your builder will be able to help you assess the property and find the best deck size moving forward.

Get the Right Deck Shape

Once you’ve decided on the size, the next big thing to decide is what shape you are going to get. Again, this will boil down to what you are looking for in a deck. Let’s look at some options that you can explore.

The most common shape will be rectangular. This is the easiest to build. Though there are a few ways that you can spice it up. You can add circular sections. These can be a good place for having conversations. A circular section can also prove useful if you are thinking about adding a spa.

Another way that you can make the shape of your deck unique is by adding more angles. When done right, this can prove to be visually striking, helping to set your deck apart. As we’ll discuss later, it can be helpful to use a CAD rendering. This gives you a good idea of what the deck will look like. You can experiment with changing the size and shape.

Finding What Elements to Include

A deck should complement your lifestyle. There are a few ways that you can do this, depending on how you plan on using it. For example, you might want to get an outdoor kitchen. You ask if these elements can be built into the deck.

Consider the Lighting

The next thing to consider is the way you are going to light your deck. Again, there are lots of options that you can explore. You might want to wire electric lights into the ceiling. Fluorescent lights will provide a lot of illumination. Or you can use downlights for a spotlight glow. Wall sconces can be attached to the house.

If you aren’t going to use it at night, you can use lanterns or some fairy lights. These can run on solar power. Though it’s not a long-term solution, you can use candles to set a romantic atmosphere.

Create a Private Space

While you might be creating an elevated space, you don’t want all the neighbors to be watching you lazing about in your underwear. Because of this, you should be designing your deck with privacy in mind.

There are a few ways you can keep the deck as your private zone. First, you can have natural foliage, like trees or hedges, to help obscure the view. If this isn’t possible, you might want to consider using a privacy screen. This can be installed yourself, often within a few minutes.

covered deck shingled roof stone pillars all covering a hot tub

Think About Shade

The next thing to consider is how you will be shading the deck. After all, you don’t want to be getting sunburnt during the summer months. This shade can also provide some protection from the wind and the rain.

There are a few options that you might want to explore. For example, you have an established tree. You can allow this to grow up through the middle of the deck. The leaves will provide shade. It’ll also provide a focal point and prove to be a conversation starter.

If you don’t already have trees, you can transplant some from your local nursery. Within a few years, you will have a reliable source of shade for generations to come.

Another option is to use a patio umbrella, rather than some permeant structure. This will save you money while allowing you to enjoy the summer sun. If you want a more long-term solution, you can install shade sails. You might even want to use rolling shades. These look beautiful and you will be able to install them yourself.

The best and arguably the most appealing option is to install a more permanent roof over the deck. A good example of this is a pergola. Though this can be a more expensive option when compared to a large umbrella, it will last for a long time. Your builder can talk you through some permeant shade options that you can explore. If you live in Northern Colorado or Southern Wyoming, TNT can be that builder.

Pick the Right Decking Material

There are lots of decking materials that you can choose from, each with its own unique sets of pros and cons. For example, wood is a natural material and will have a beautiful color. But it will take a lot of work to maintain. You’ll need to seal it once a year.

Because of this, it’s best to get a deck that is made from TimberTech’s composite material. There are plenty of benefits that this material can provide. It looks like natural wood, but it will be sealed so you don’t need to worry about the risks of moisture and mold. Because of this, it will last for a long time. Even better, it’s made from recycled materials.

Consider the View From Inside the House

It can become easy to focus on what you can see from the deck. But it can be easy to overlook what you will be able to see when you are inside the house. You don’t want to have the indoor windows blocked by unsightly things like railings or supports for the decking.

Sometimes, you will be able to change some aspects of the deck to avoid these problems. For example, you might be able to lower the deck. Or you can use glass railings, so you can see through them.

Know Your Budget

It’s important to make sure that you have a clear understanding of your budget. This means that there are some features that you might not be able to get. For example, you might not be able to create a curved area on your deck.

But that doesn’t mean that you won’t be able to get a nice deck. At TNT Home Improvement, we know that not every client will be Warren Buffet. Because of this, we pride ourselves on offering a service that will be able to suit any budget type.

Blend the Deck and the Yard

Moving between the deck and the house should be a seamless experience. The same should be for moving between the house and the yard. There are a few ways that you can do this. You can include stairs, leading down into the yard.

You can also use some landscaping elements to help tie the deck into the yard. For example, you can create a path, leading the way to the deck. You can tie other elements into the deck. If you are making a firepit or bench you can use the same wood color.

Use a Solid Stain

It’s a good idea to consider the color of the wood that you will be using to create the deck. You want to get something that will gel with the exterior of the house. Instead of painting, you should try using a solid stain. This will bring out the natural colors in the wood. It will also be easier to maintain, lasting longer than paint.

Do a 3D CAD Design

Once you have a fairly good idea of what you want the deck to look like, it’s time to get in contact with the TNT Home Improvement team. We’d love to come to your house and talk about the project in more depth. We can also do a CAD design. This is a 3D illustration of what the final deck will be.

These renders look very similar to the finished product. This is the ideal time to make any final adjustments and experiment with different designs. Usually, this is one of the last steps in the planning process. Once you have a design that you are happy with, the builder can start creating the deck of your dreams.

Get an Engineer to Approve

While a deck might look great on paper, we don’t want it to collapse after a few years. Before we can start building, we need to get an engineer to take a look at the design and give it their tick of approval. That’s why TNT Home Improvement has our own in-house engineer, to help speed up the process so you can get to building faster.

Think About Traffic Flow

Once you have a completed deck, it’s time to think about the type of furniture layout you are going to use. There are a few ways you can make sure that everything is in the right place. One of the most important principles is to think about the way that people will move through the deck. You don’t want to design the space so you end up smashing your shins into tables. Because of this, you need to have a clear walkway.

It can also be a good idea to have designated zones. This helps keep the deck looking coherent, so you’ll be able to navigate through it easily. For example, you might want to have one part of the deck dedicated to cooking and preparing food. Another section will be used for sitting together and eating the meal.

Though adding furniture can be a lot of fun, it can also lead to a lot of disagreements. Be prepared to move your things around, trying to find the perfect place for everything. During this time, you should take a look at social media. Seeing how other people have arranged the furniture on their deck can give you some inspiration.

Give TNT Home Improvement a Call

Hopefully, you now have a better idea of what to consider for your next deck and or patio cover project. Thankfully, this doesn’t have to be a pipe dream. At TNT Home Improvement can help you create the deck of your dreams. We have the team and experience to handle any project and suit any budget. So, if you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or visit the home page and fill out the contact form to make an appointment to discuss your next home improvement project.

composite decking deck builder outdoor living space shade structure tnt home improvements wood deck

How Can I Make My Deck Look Better?

Twenty Years ago, your deck looked absolutely amazing! Then time and wear got to it and its visibily has given up, with chips, warps, splinters, and questionable stains. It doesn’t help that the old furniture you have on it right now, if any, isn’t making the deck look any better. What can you do?

Homeowners can improve the appearance of their decks by repairing them, repainting or staining them, and/or adding furniture and decorative accents for more functionality and color.

Having trouble improving your deck? Read below for help on cleaning, picking colors, and adding furniture to help inspire you.

How do I Make My Decking Look Nice?

Good-looking decks require two things:

Being clean and tidy
Being decorated

Naturally, it isn’t very relaxing to lounge on a deck that is dirty, cluttered, splintered, or damaged. Necessary repairs and cleaning would be the first steps toward creating an enjoyable outdoor space.

After that, you can get to the fun part of decorating the deck with convenient furniture, rugs, plants, pillows and cushions, and more. That’s all it takes to turn a deck into an outdoor extension of the comforts of home.

How Can I Clean My Deck Quickly?

The quickest way to clean your deck is to pressure wash it. If food or drink spills occur, clean them up right away so that they don’t soak in. Stubborn stains might take a little more time, but not by much, and the effort to remove them is worth it.

For composite decks, remove stains with a mild soap like dish soap, or use a cleaner that’s specially formulated for your deck’s specific brand. Grab a brush to scrub at the stain, then wash the soap off thoroughly.

If you have a wood deck, stains from food and drinks can be removed relatively quickly by wetting the deck with water, dissolving deck cleaner in a bucket with warm water, and then applying with a mop, scrubbing with the grain. Let the solution soak into the wood for about 10 minutes, reapplying the solution if it starts prematurely drying, and then rinsing thoroughly with water. If solid stains are your trouble, you’ll need to strip that section of the deck with a deck stain stripping solution and a brush with firm bristles.

Lastly, for concrete stains, use a powdered oxygen cleaner and water to remove water-based stains or mineral spirits and a wire brush for oil-based stains. Then scrub the stained area again with an oxygen bleach and water mixture, and rinse off.

How do I Make My Decking Area Look Good?

When a deck looks inviting, it’s partly because it has furniture with which you and your guests can relax or dine. Furniture like a dining table and chairs, coffee table and chair sets, benches, or pergolas, are excellent additions. Appliances that refresh everyone, such as bars and BBQs, are also inviting.

Furniture won’t be enough to make a deck look good, they need to be decorated in order to be inviting. Tables need dining sets, cloths, and napkins, seating areas need cushions and pillows, and tables always benefit with centerpieces like firepits, and plants. The colors of these accents pieces, decorations, flowers, and the deck itself will make or break the environment, so get a good idea of your color scheme.

What Color Should I Paint My Decking?

When you choose a good color for your deck, it ties your home and outside furnishings together seamlessly, instead of creating distractingly separate spaces, and it will add beautiful visual interest with the right amount of contrast.

You can have a better chance of choosing a good deck color by matching it to the color of existing accent colors on your home’s exterior, like the trim or doors. It doesn’t even have to be a perfect match. You can just pull out a hue of color from your house’s exterior to use for the deck.

Another common color trick is to use a color wheel to determine your primary color, secondary color, and accent color by figuring out which color scheme you’re going for:

Monochromatic
Analogous
Complimentary
Or triadic

How Can I Make My Deck More Modern?

Modern decks are gorgeous! Yours can look modern by employing techniques like:

Using metal and wood, such as with rails
Adding a pergola
Using dark stain for greater contrast with your house, or dark woods like Ipe.
Create patterns in the boards
Having varied plank colors
Adding built-in wood seats or benches
Use hidden fasteners to prevent using nails that interrupt the design
Use recycled material

One move that makes a deck modern in at least three ways is by using composite decking. You can have as dark a color as you’d like, have intricate designs, and in the case of TimberTech, can be made with up to 80% recycled material.

How do You Make Decking Shine?

Over time, the luster and color that your hardwood, composite, or concrete decking had will begin to wear off with heavy traffic, abrasive cleaning, excessive heat and sun, etc. So how do you get that shine back? After removing furniture, rugs, plants, and other decorations, restoring shine will come in three general steps:

Clean
Apply shining product
Maintain

Usually, the shining product will be some kind of stain or paint, which begs the question, is it better to paint or stain a deck?

Wood

Start repairing any damages such as replacing broken and splintered boards. Your next steps will depend on if your deck was originally stained, varnished, or painted.

If your wood deck was stained when it was originally installed, just thoroughly pressure wash the deck with either 500-600 psi or 1200-1500 psi, depending on if your deck uses softwood or hardwood. After cleaning, you have to sand the deck with 60-80 grit on the main deck and 80-100 grit on handrails, then vacuum or sweep the dust off.

Now you can stain the deck with either water or oil-based stains. Water-based will be easier to clean, but oil-based soaks into the wood better and lasts longer. It should be easy to find stains that also seals. Before staining the actual deck, make sure the stain you have has the color you want by swatching a sample on a spare board. Repainting or revarnishing is the same process: clean, sand, then paint or varnish.

For wood decks, paint will last longer than stain and has no trouble covering previous stains or blemishes, but hides the grain and is not easy to remove once it’s down.

Finally, you can maintain your hard work by lightly washing the deck with a mild soap, then applying a deck brightener (if you stained the deck) and rinsing, and lastly, applying new stain.

Composite

Composite decks, like TimberTech, are meant to be low-maintenance and long-lasting with a durable glossy finish. They have a minimum warranty of 25 years for fading and stains and neither paint or stain will stick to the deck if it’s capped. If you still want to go through with re-shining, the process is below.

Begin the process by removing furniture and decorations from the deck. Then, clean your composite decking by using Timberdeck’s Deckcleaner and the appropriate brush to scrub each board. Use a 1:3 ratio of cleaner to water.

If you have TimberTech composite:

AZEK: A stiff brush with natural fibers
PRO or EDGE: A medium to a stiff nylon brush

Use a hose or a power washer that’s at least 8” away from the deck at 1500 psi with a fan-tip nozzle to thoroughly rinse off the cleaner. If you leave any residue and move on to another section, you’ll end up with a film.

If you’re staining, use a reputable oil-based stain and sealant and apply it with a normal brush and/or a roller. Then simply maintain the deck by washing it down seasonally.

If you’re painting, you’ll have to sand the entire deck with a 240 grit in order to remove the gloss finish and get the paint to stick. Sweep off the shards. Next, you’ll need to prime the deck first with a latex exterior primer for flexibility, and once the primer is dry, paint.

For composite decking, both paint and stain work equally well, so long as you choose brands made for outside and for being walked on.

Concrete

To resurface your concrete pool decking, begin by grinding and pressure washing the surface at approximately 3000 psi. The next step is to repair any cracks, chips, or spalling, and then smooth out the patched areas by grinding. Then, just wash off or vacuum the concrete dust.

Now you can finally mix and apply the resurfacing agent such as Sakrete Flo-Coat with a trowel or squeegee. The last step is to drag a broom across the fresh agent to create texture.

Conclusion

Trying to make sense of your decking situation? Well, if you’re located in the Northern Colorado or Southern Wyoming areas, we can come by and talk about your next big backyard project! You can give us a call today at (970) 663-2868 or visit the deck services page and fill out the contact form to make an appointment for a free consultation.

composite decking deck deck builder deck contractor outdoor living space tnt deck tnt home improvements wood deck

What Type of Decking is Best Around a Pool?

Decking around your outdoor pool is more than just an aesthetic choice that takes your home from a level 5 in impressiveness to an 11! Decking allows you, your family, and your friends to enjoy sunbathing and cooking outside without having to walk on dirt and mud, tracking it behind you wherever you go, even into the pool water. Pretty messy and uncomfortable. The question then isn’t should you get decking around your pool, but what kind of decking surface you need.

Textured surfaces with low-heat retention are the best materials for pool areas for their non-slip gripping capabilities and burn prevention while being under direct sunlight. Composite decking will prevent the growth of algae while the stones in stone or concrete pavers are entirely waterproof.

Keep reading below to find out more about decks that prevent any slipping, will stay cool, what the big deal is about “composite decking,” and who can help you with all of this.

Non-Slip Deck Surfaces

The non-slip capabilities of your deck will depend on the amount of texture the surface of the material you choose has. Around a pool, you don’t want so much texture that you’re scraping your feet, but not so little that everyone just, well, slips. That would defeat the whole purpose.

When it comes to non-slip options, my crew and I at TNT have often used textured candidates like,

Composite decking
Stone patios
Concrete patios
Ceramic tiles

Composite decks are more slip-resistant than traditional wood options and will even prevent slippery hazards such as algae from building, thanks to the material.

The next non-slip option you have is stone. Stone, granite, or sandstone pavers (to name a few) have naturally textured surfaces that are beautiful and resist fading from the sun.

Patios paved with stone or colored and textured concrete will give you the wonderful and safe textures you want, is completely water-proof, and like wood comes in a wonderful variety of shapes, sizes, and colors so that you can really complement the architecture of your home and make your pool area something special.

You might not have expected ceramic tiles to make it as a non-slip option. After all, ceramic tiles have been traditionally much smoother than any other material, but today include non-slip options. Ceramic tiles are very commonly seen as the border around the pool so that it’s easier for you and your guests to climb in and out of the pool, but there are other benefits too.

Just like the composite, ceramic tiles resist the growth of mold, mildew, and unhealthy bacteria, accomplished thanks to the fact that the water can’t be absorbed into the tile, and with nowhere to hide from the sun, is forced to evaporate.

Pool Deck Materials That Stay Cool

In addition to non-slip surfaces, you should consider materials that won’t burn you after climbing out of the pool. Some materials will have high-heat retention, they will absorb heat, store it, and build up the heat they are absorbing until it’s completely inadvisable to walk barefoot on the decking or patio. So what are the pool deck materials that actually stay cool, or at least don’t burn you?

Materials That have Low-Heat Retention

Concrete pavers made with precast concrete are an excellent patio material if you don’t have much shade around your pool area. Materials like concrete and brick have high thermal mass, which means the heat will neither escape or be absorbed easily; it takes a long time to heat up these materials, but once the heat from the sun is taken away, it also takes a long time for them to cool down again.

Which Materials Retain a Lot of Heat?

Most composite decking options retain a considerable amount of heat, but this is not usually a problem for residential properties like yours because there is almost always enough shade from trees, overhangs, and various covers that will keep the decking from getting too hot.

TimberTech does have a composite option, called Azek, that is 30 degrees cooler than competing boards and 40% more slip-resistant, which makes it a fantastic option for getting a well-functioning deck.

Are There Any in-the-Middle Options?

Your everyday wood timber is actually a good in-between option in heat retention but will require much more maintenance to avoid hazards like splinters, warping, and just fading. Wood can get really hot, but even several hours directly under the sun won’t burn anyone. But keep in mind that putting wood decking next to a pool will require a lot of maintenance like restaining or refinishing way more often to keep the moisture out.

Regardless of which material you choose, a common rule-of-thumb is that the darker the color of the material around your pool, the more heat it will absorb, which means the hotter it will feel on your poor feet.

Composite Decking Around Pools

Many decking materials are prone to damage, such as water damage or termites, around your pool if not properly cared for. But that includes a lot of work! Just think of the layers of sealing and resealing you could look forward to doing. These are a couple of reasons why it’s often better to choose a material that resists the wear and ruin that decking is prone to. Enter composite decking!

Composite decking, instead of being composed of everyday lumber, is a composite – that is, made up of various elements – where the elements are wood fibers and plastic film mixed together with bonding agents.

What you get is a beautiful, water-proof, durable deck around your pool because composite decking is much more durable than the standard lumber option. You can even boast about how environmentally friendly your deck is since it’s made of old, recycled wood and plastic and won’t have to be replaced as quickly as traditional options.

Just know that different composites will require different levels of maintenance. High-grade composites require the least amount of fuss. Timbertech is renowned for their composites that are not only high-grade but look the most like wood that can be fashioned into numerous patterns and sophisticated designs. We should know. We use them a lot here at TNT Home Improvements.

What Material is Best for Above Ground Pools?

Above-ground pools can be a real eyesore with their cheap-looking walls, so building decks are a very nice solution to that problem. However, above-ground pools do require a little more attention to detail with decking material than ground-level pools.

You need to consider how much decking or patio you want. Do you want a combination deck, a side deck, or a full-surround deck around the pool? These options and the material you really want or need to use around it will significantly influence the cost of the project.

The best material for above-ground pools still needs to be water-resistant at least, resistant to weather changes, durable against everyday wear, and beautiful to behold. These reasons are why I would suggest composites or Redwood planks. Pavers and concrete patios are very nice, but it isn’t practical to use these materials for above-ground pools.

Again, composite decking is naturally elegant, sturdy, resistant to the weather, and you won’t have to worry about routine maintenance.

Maybe the biggest thing you’ll have to decide is whether you want your deck done professionally or not. There are plenty of hidden costs DIY deckers don’t necessarily know about, such as fencing as per state regulation, or even how the pattern of your deck affects the cost of materials.

Conclusion

Are you located in the Northern Colorado or Southern Wyoming areas? You’re in luck! Give us a call today at (970) 663-2868 or visit our decking services page and fill out the contact form to make an appointment for a free consultation with us. Together, we’ll discuss your pool project and make your dream deck a reality that will last you for years to come.

composite decking deck builder outdoor living space pool deck wood deck

How To Maintain a Wood Deck?

a pressure washing wand cleaning off a wood deck

Like it or not, your wood deck will need maintenance to keep it in the best shape possible. As well as general wear and tear, your deck is exposed to the elements such as snow, rain, and UV rays from the sun. Maintenance is a vital skill for anyone owning a deck who wants to avoid expensive repairs and replacements down the line. Neglecting a deck can cause problems in terms of appearance and overall use.

There are quick ways, wrong ways, and correct ways to carry out maintenance on your deck. Make sure you carry out regular checks on your deck to keep the condition as high as possible. Regular cleaning and sweeping are quick ways to keep your deck looking at its best as well as repairing any minor damages to avoid them becoming larger problems. Applying a protective coating to your deck annually or bi-annually is also a great way to protect it against the elements.

Many people go to great expense and effort in having an amazing deck installed and then fail to maintain it for a couple of years or protect it in the wrong way. Reacting to a problem is almost always far more costly compared to being proactive. Taking regular steps to protect, clear and repair will mean that the time spent looking after your deck will be minimal.

How do you take care of wooden decks?

Before any kind of maintenance can take place, you must make every effort to understand what needs to be done. If your deck is in a shaded area, surrounded by greenery, then you should be protecting against potential moisture and mold from fallen leaves for example. A deck that is in a sun trap will need a totally different product applied to it such as one that is designed to protect against UV rays. Just make sure that when you are selecting a sealant, you are taking into consideration what you are protecting against.

Why should I maintain my deck?

Installing a good quality deck is a big expense so looking after it makes sense. People spend a fortune on a car and maintain it so that they don’t need to replace it every year. The same is true of your decking area, no matter the size. Your deck will last far longer and stay in a far better condition with proper maintenance. Using suitable products helps keep mold, mildew, and stains to a minimum. Wood and moisture are not a good mix so make sure you seal up your wood deck to protect it.

Are you prepared?

Choose the time of year carefully for any maintenance or cleaning. You need the outdoor temperature to be above 50°F during the day and night and for it to be a dry forecast. This stops the wood from contracting in the cold or swelling in the damp. Also, check that you have all the tools and equipment on hand. There is nothing worse than starting a task and then realizing you are missing a tool or a tin of oil.

How do I make my deck last longer?

In short, look after it! Regularly sweep leaves and dirt off the boards and deal with stains from food or drink quickly. All these little jobs will make a huge difference to the life span of your deck. Remember, a new deck should be left untreated for at least 60 days to allow it to settle and expand naturally. Painting or sealing before the 60 days is up can lead to cracks appearing.

How do you take care of a wooden deck?

This will depend on whether you have chosen a hard or a soft wood. Hardwood decking boards are generally more resistant to mold than softer woods, but this doesn’t mean they should be cared for any less. Hardwoods tend to be oilier in their make up so choosing a suitable sealant is important. It is advised that hardwood be left untreated for a period of 2-3 months to allow for oils to leave the wood naturally.

This is not the case with softer woods. These need to be treated quickly and on all sides to make them more resistant to rot, mold, and UV rays. When the initial seal is applied, it needs to be left for 24-48 hours before an oil or paint is applied to it. Applying this early will mean they will not bond with the wood and will crack.

How often do decks need to be sealed?

Sealing your deck should be repeated every 1 – 3 years. This will depend on the condition of the deck and what weather conditions have been like. A mild winter for example won’t have affected your deck as much as a harsh winter with snow and ice.

Choosing not to seal your deck won’t cause immediate damage such as rot and splintering but the overall appearance of your deck will diminish. Luckily, you can seal your deck later which brings out the natural grains of the wood again. Sealing your deck will help restore its natural color.

Should you pressure wash a deck?

There are mixed opinions around the use of pressure washers on decks. Some people love them, and some people don’t. If you are going to pressure wash, it is important to remember you will have to do something else once the washing has been completed. Pressure washing mold and mildew from decking boards is very effective, but it does leave spores behind. These need to be swept away as they can grow back very quickly indeed – and they look ugly!

It is also important to consider the strength of the water. Too strong a jet and you risk damaging the wooden boards. This can lead to an unnecessary expense of replacing part of the decking.

Is it better to sand or power wash a deck?

Sanding is better for the deck compared to power washing. Power washing is far quicker than sanding but is also the quickest way to damage your deck. A slight splinter or crack can be made into a major problem with a power washer as you run the risk of damaging the appearance of the wood. Sanding is more beneficial and is a more natural way of maintaining the wood. Sand with the grain to avoid unsightly scratches and sweep away any saw dust that is generated. Removing this dust is critical as the next step will be to apply a sealant to the wood. Any dust that is still there will spoil the finish of the boards and mean that the sealant will be less effective.

To paraphrase an old saying, look after your deck and your deck will look after you. Decks are a fantastic addition to a home and create brilliant outdoor spaces. Maintaining them properly shouldn’t be a chore and should be completed regularly. The little and often approach to deck maintenance is the best way to operate rather than waiting for a huge problem to develop which could involve an expensive repair.

If staining and sealing a deck once a year isn’t something you want to do it may be time to think about upgrading to a composite deck. Composite decking is a wood/plastic hybrid mixture that creates a product that is almost completely maintenance-free. I say almost because you still will want to clean it off every once in a while but you won’t ever have to sand and stain it.

If you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or visit our Deck Services page and fill out the contact form to make an appointment to discuss your next home improvement project.

deck deck builder outdoor living space tnt deck wood deck

All About Composite Decking

Maintaining a deck could require a lot of work, especially if the materials used are prone to damage.

Earlier deck constructions were mainly made of lumber that needed high yearly maintenance. That’s why homeowners have switched to composite decking.

Newer houses with decks can now choose either timber or composite materials for the structure.

Composite materials are made of wood fibers mixed with plastic film through bonding agents. They are often chosen because they are more durable than their wood counterpart.

However, going for composite decking depends on many other factors. So, if you’re wondering if composite decking suits your home, stick around and find out.

What Is Composite Decking?

Simply put, composite decking refers to deck construction that uses composite materials such as deck boards made of recycled lumber and high-density plastic strips.

It is considered eco-friendly and sustainable as composite materials are less prone to damage sustained by wood decks.

What Do I Need to Know About Composite Decking?

Composite decking is not a complicated project. All you need to know is how the composite materials match your aesthetic taste and the level of maintenance they require.

While a wooden look is often the top choice for a deck, composite decks are not too far from achieving this look.

In terms of maintenance, composite decks require less work as they are more resistant to water damage, termite infestation, and other critical destruction.

What to Consider When Choosing a Composite Deck?

There are a few factors you need to understand before you go for composite decking. That includes the type of materials, visual aesthetic, design, size, budget, and other factors.

Furthermore, it is best to determine if you plan to outsource the construction project to professional deck builders or do it yourself.

Materials

Composite decking materials are not hard to find, especially in this day and age where everything is found online.

We’ve established that deck boards, which comprise a majority of the deck, are made of recycled timber and plastic.

However, composite deck board quality may differ from one manufacturer to another. Hence, it greatly benefits your project if you choose high-grade composite decking products from reliable manufacturers. And if you’re looking for exactly that, you can check out TimberTech.

On the other hand, if you plan to hire a contractor or team of experts in Colorado to build your composite deck, you can rest assured that TNT Home Improvements use nothing less than quality materials from TimberTech.

Visual Aesthetics and Design

Planning to build a composite deck involves identifying the right color that matches your home, the shape of the deck, and many other factors of its visual appeal.

With composite boards, you don’t need to paint the deck as they already come in a variety of colors. Moreover, some colors and the textures almost imitate that of a wooden deck.

Hence, if you’re going for a traditional lumber deck look but with high considerations for durability, then composite decking could just be the right choice for your taste.

Size

The size of the composite deck depends on the area where the structure is placed. It could also be influenced by the type of activities you’re thinking of doing on the deck.

Moreover, size can also depend on your budget. It’s a general principle in a way. Larger composite decks will have more expenses than smaller and medium-sized ones.

Budget

The type of composite deck you can build in your home also relies on the budget at hand. If you have a tight budget, you may have to consider the size and the type of composite materials to use.

Unfortunately, cheaper boards tend to have less quality than costlier ones. So, you may have to rethink the size of the finished space.

Location

While composite decking materials are highly durable, they could still deteriorate over time. Fortunately, you can enjoy it for longer than wood boards.

Nonetheless, its speed of deterioration can be influenced by its position. For example, if it’s directly exposed to strong sunlight, it could start to fade faster.

Therefore, it’s good to consider the position or whether you should put up a deck cover.

Is Composite Decking Any Good?

Yes, composite decking is a great choice and can be well worth the money you spend.

You can think of composite decking as an evolutionary step in deck building. It resolved some of the critical issues that came along with wooden decks while maintaining outstanding aesthetics in the process.

Check out some of the benefits of composite decking.

Composite decking materials are made against common decking damages.

It’s always about high-quality and endurance all the way. These are what many homeowners look for in a deck. Composite decking offers exactly these qualities.

As man-made materials, they are designed to withstand damages caused by molds, mildew, water and sunlight exposure, and many others.

It requires low maintenance.

Since composite decks are less prone to damages, it also means that they need low maintenance compared to any other type of deck. So, if you don’t have the time and extra energy to refinish your deck once a year, better stick to a composite deck.

It is easier to hide the fasteners

Because of the way most composite deck boards are manufactured, they are created with special groves down the side that can be used to attach hidden fasteners.

These fasteners have sharp teeth that grab the boards on either side of it and a screw run down through the middle holding it securely to a joist underneath. All of this sits down in between the boards making for a clean finish.

It’s environmentally friendly.

Composite materials are made of recycled items. Hence, they are more sustainable and environmentally friendly. Moreover, they last longer, so you can save yourself from frequent board replacements.

What Is Bad About Composite Decking?

Although composite decking has plenty of advantages, it doesn’t mean that it has no drawbacks.

It can be pricey.

Composite decking can be a bit pricier than your average wood deck. The high cost is primarily due to the durability that comes with the material. Nonetheless, you get your money’s worth as composite decking lasts longer than any other deck.

It lacks the natural feel of the deck.

While it’s true that composite deck imitates the color, pattern, and sometimes texture of wood. However, if you were to compare them side by side you would see that composite lacks that real wood feel.

Especially if you are someone who likes stained wood and seeing the depth and layers of the grain, composite may not be for you.

It still needs some degree of maintenance.

You will have to maintain your composite deck to ensure that it remains durable for the years to come. It includes sweeping the deck board, picking the leaves, and the occasional light wash or spot clean.

How Much Does a Composite Deck Cost?

The average cost of a composite deck is about $8,000, give or take. The full price depends on the size of the deck and your choice of materials. Composite boards cost about $20 to $40 per square foot.

How Long Does a Composite Deck Last?

A well-maintained composite deck can last between 25 to 30 years. After that, replacing the boards wouldn’t be a pain, especially if you choose composite products with warranties.

How Does Composite Decking Drain?

Under the composite deck, you can install a gutter system. Therefore, you will have to reserve the surface below for drainage that directs the water out from under the deck.

If you’re wondering if a drainage system designed for decks is right for your next project, then check out our article “What is Underdecking”

Final Thoughts

A composite deck is a fine addition to your home structure. Not only does it provide a space for backyard or outdoor activities, but it also increases the value of your house.

If you’re considering composite decking, make sure you consult with professional builders to help you plan the project within your budget range.If you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or visit our deck services page and fill out the contact form to make an appointment to discuss your next home improvement project.

composite decking shade structure tnt home improvements wood deck

What Are the Different Parts of a Deck Called?

pic of a Composite deck built in fort collins, co

Knowing the different parts of a deck can guide you in understanding how a deck installation works.

A deck has several components that contribute to its strength, capacity, endurance, and safety. The major parts of a deck include the foundation, framing, decking, railing, stairs, drainage system, and hidden fasteners.

If you are curious about what makes an ideal deck, stick around, and learn its essential parts.

Parts of a Deck

1. Foundation

Like any other building or house component, a deck should have a solid foundation that holds up the entire structure. Three major parts make up the groundwork of a deck.

1.1 Footing

The footing is the very foundation of your deck. First, it is laid on the excavated portion of the ground. Then, concrete is poured to strengthen and carry the overall structure of the deck. Simply put, the footing acts as the base.

However, before you can plan on how much concrete and how deep the footing should be on the ground, you have to check your local building code and the frost depth requirement in your region or state.

For a standard 12 X 12 deck, you should aim for at least three footings. But if you’re planning to add stairs, add two more footings for better support.

1.2 Pier

The pier is also made of concrete poured into a column or cardboard tubes. Of course, the number of piers or posts depends on how many footings you have. These posts function to hold up the beams.

Moreover, having sturdy piers or posts not only allows good airflow. But they also ensure that you can perform underboard repairs safely and conveniently.

Hence, enabling smooth maintenance of the deck.

2. Framing

Once the foundation is laid down, here comes the framing that gives the deck a case structure. The frame includes the beams, joist, ledger, support columns, band board, and post base.

2.1 Ledger

The ledger is connected to the house and usually leveled to the floor of the main home structure.

It is typically made of pure or treated lumber measuring at least 2×8 nominal and attached horizontally to the house’s exterior wall.

The size should be the same as that of the measurement of the joist.

Although the foundation plays a big part in holding up the deck, ensuring that the ledger is fixed tightly on the main building is another vital safety precaution for homeowners. That is why the installation process should comply with the building code.

2.2 Support Columns

The support or structural columns/posts are connected to the pier and hold the beam. The size of the columns depends on the expected capacity of the deck.

Standard sizes for support columns range from 4 feet x 4 inches to 8 feet x 8 inches.

2.3 Beam

A deck beam is a longitudinal piece of lumber placed on top of the structural columns.

The beams are essential for framing and substructure support. They are typically made of wood or composite materials.

Beams are usually positioned perpendicular to the joists. You can opt for either flush beams or drop beams.

Flush beams are placed at the same level as the joist, which is attached using the joist hangers. If you’re building a smaller deck or one with an atypical form, then flush beams are the way to go.

On the other hand, a drop beam is placed right under the joists. This position provides better weight support for the frame.

Furthermore, if you choose a drop beam, you can extend and add a cantilever that enhances the deck’s aesthetic.

2.4 Joist

Joists are planks of pure or treated timber that support the deck boards. They are placed on top or at a similar level as the beams and are positioned parallel to one another.

Likewise, joists often run perpendicular to the house as the deck boards are parallel to the main building.

The distance of the joists depends on the position of the beams and ledger. The local building code dictates that residential decks should have the joists distanced at 12 inches to 16 inches apart when it comes to spacing.

2.5 Rim Joist

The rim joists are lumber that act as the outer joist covering parts of the deck structure. They are connected perpendicular to the joists.

2.6 Header

The header is located on the opposite end of the ledger. It covers and supports the outer side of the joists.

3. Decking

After the framing is complete, the next step is decking, wherein you install the deck’s flooring.

While this is considered the most exciting part of the deck building process, there are several considerations when choosing the best flooring materials, particularly the deck boards.

3.1 Deck Boards

Deck boards make the surface of the deck that people walk on. Available deck boards come in different species of timber and composite materials made by combining wood components and plastic.

As a rule of thumb, the first thing you have to think about when choosing deck boards is thickness.

The strength of the flooring relies on the foundation, framing, and deck board thickness. This attribute is also influenced by joist spacing.

If the spaces between the joists are too far apart, you may want to consider stronger deck boards for optimum support.

Nonetheless, one of the best decisions you can make is selecting quality deck boards that could last a lifetime. With this choice, you can rely on deck board collections from TimberTech.

4. Stairs

Putting stairs on your deck is vital, depending on the height of the structure. Naturally, the stairs allow you to go up and down the deck without having to go inside the house.

For deck stairs, the essential components include a tread, riser, and stringer fascia. In some cases, stylish railings are added.

The tread is the part you step on when you ascend or descend.

On the other hand, the riser is positioned vertically to the tread.

The stringer fascia provides the overall support and framework of the stairs and holds the treads.

5. Railing

It’s hard not to imagine a high deck without railings.

On the other hand, for houses with low decks, this seems to be a common occurrence.

Nevertheless, adding railings to your deck will not only provide additional safety, but it can also make the structure visually appealing.

5.1 Top Rail/Cap Rail

The horizontal structure at the very top of the rail is called a cap rail or top rail. It provides efficient finishing on the railing system.

Choosing a top rail depends on the overall design of your deck.

Materials for the top rail should be carefully screened. You can opt for a metal or timber top rail.

If your deck style works well with wood, choose quality lumber to avoid cases of splinters.

Also, you can go for composite materials to keep the beauty of the wood while providing added strength and endurance.

5.2 Base Rail

The base rail is a horizontal structure attached to the flooring of the deck. It also contains the baluster and keeps the entire structure fixed to the deck perimeter.

5.3 Baluster

The balusters provide the intended barrier of the railing system. They are placed in between the top and base rail with enough space for airflow.

6. Drainage System

In some cases, a drainage system may be considered optional. However, it is necessary for decks that store water unintentionally.

Since most decks are made of wood, prolonged exposure to water can cause irreversible damages. Hence, installing a drainage system can be beneficial.

Consult with your contractor if your deck needs to have a draining structure.

Summary

Deckbuilding need not be complicated if you know the parts and how to install them properly. But if you truly want to get the convenience you deserve, it is still best to hire professional deck builders.If you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or visit our deck building services page and fill out the contact form to make an appointment to discuss your next home improvement project.

composite decking deck builder deck maintenance deck railing wood deck

What is a Composite Deck and What Are the Pros and Cons?

Nothing says comfortable backyard time like a lovely deck.

Over the years, more and more homeowners have opted for a pleasantly cozy deck suitable for cooling off or just hanging around.

While wood decks are all the rage decades ago, nowadays, many homeowners are considering composite decks over traditional lumber decks.

According to a study by The Freedonia Group, the demand for decking is projected to increase at 1.3% annually. The demand paves the way for companies like TimberTech to offer high-quality decking materials.

Nevertheless, residential renovations largely take part in this expansion. It comes as no surprise as modern composite decks are flexible and durable.

You could host a Sunday barbeque for your friends or have some good-old fashion group games. This can easily be achieved with the right deck of choice and the craftsmanship of reliable deck builders.

So, if you are contemplating the installation or renovation of your deck, stick around to find out why a composite deck could be your best choice.

What Is a Composite Deck?

A composite deck is made of a combination of materials, primarily wood, and plastic. It is best known among homeowners as a durable alternative for lumber or traditional wood decking.

Furthermore, it requires less maintenance which makes it a convenient choice.

You may recognize a composite deck board as a wood-like material as most boards are patterned to imitate the natural looks of a traditional wood deck. But, with other materials in the mixture, it goes against the disadvantages of pure wood, such as decays, rots, and other damages.

Composite deck boards are meticulously made through a co-extrusion process where wood fibers, sawdust, and polyethylene polymers are combined under high temperatures to create a resilient and sturdy core material.

In most cases, a polymeric cap is wrapped around the core. Finally, the mixture is finished with the co-extrusion of other materials and pigments specialized in preventing damages to the deck.

Pros of Composite Deck

The benefits of composite decking span from low maintenance requirements to a wide variety of colors and patterns you can choose from.

To top it all, composite decks come with a warranty that protects your investment.

Take a closer look at these advantages to help you decide if a composite deck is for you.

Durable

Composite deck materials are designed to last for decades. The boards and rails are water and stain-resistant. And they don’t harbor molds and pests that could damage the deck.

Customizable

When you go for a composite deck, you might be surprised by how flexible the materials are. You get plenty of options when it comes to designs and patterns.

Moreover, you can also combine or rearrange the patterns, especially if you’re going for tiled boards.

Requires Low Maintenance

It is far easier to clean and keep a composite deck away from damages than a wood deck.

Primarily, the raw materials involved in a composite deck can sustain various damaging threats. Furthermore, the deck itself is protected from fading.

Prevents Common Deck Injuries

Splintering can occur in wood decks causing injuries to your friends and family members.

During rainy days, the dangers of the deck can increase as it tends to become slippery.

In the case of a composite deck, injuries from slips or splinters can be avoided as the materials are compact and textured enough to protect you and your family.

Provides an Array of Natural Colors

If you already have a vision or an inspiration, perhaps with what you want your deck to look like, chances are you will have more success achieving that look with a composite deck.

TimberTech, for example, offers a variety of rustic choices when it comes to colors and patterns.

So, if you still want that natural wood aesthetic, you can still have it and with added benefits on the side.

Sustainable and Environmentally friendly

One of the best qualities of a composite deck is that it’s ecologically sustainable.

The raw materials used in making parts of the composite deck are recyclable. Therefore, if you choose to have this type of deck, you are taking part in saving the environment.

Cons of Composite Deck

Not everything is perfect – and that includes the composite deck.

Despite its promising benefits, there are several disadvantages when you go for composite materials instead of wood.

Nonetheless, these cons are also easily mitigated by choosing the right products and deck contractor, like TNT Home Improvements of course.

Check out some of the cons you can prepare for if you plan to have a composite deck.

Pricier Than Traditional Wood

Composite decking is pricier than the traditional wood deck. Mainly, the price is due to the quality and the intricate process of making the composite materials.

Nevertheless, you regain the amount you invest on a composite deck with its durability that lasts for a long time.

Lacks the Natural Aesthetic of Real Wood

Several materials try to mimic the natural beauty of wood but fail to do so.

A lumber deck sanded and stained with bucolic colors is always pleasing to the eye.

Although a composite deck is only partially wood, the likelihood of still achieving the “wood-like” look is still high with the right materials. If you go for TimberTech, this won’t be a problem.

Needs Better Frame Structure

The composite deck is heavier than the wood deck. As a result, you will have to potentially add more joists to the structure, and physically moving the materials to the deck location will be that much more work.

So, if you’re planning to have a do-it-yourself project with your composite deck, it may cost you more time and energy.

You can always consult and seek the services of professional deck builders like TNT Home Improvements.

Hotter Temperature

Composite materials can absorb heat, making your deck a bit hot when it’s sunny. That’s why it’s crucial to choose the right location for your composite deck.

Avoid placing it in areas hit by direct sunlight.

Another option is to talk to an expert here at TNT about a deck cover as well.

How Long Do Composite Decks Last?

Composite decks can last for 25 to 30 years. On the other hand, wood decks are known to have a lifespan of 10 to 15 years.

The longevity of composite decks is credited to the type of raw materials included in its co-extrusion process. In addition, it is highly durable, which makes it suitable for areas with harsh weather conditions.

Does a Composite Deck Get Slippery When Wet?

Composite decks are generally not slippery when wet. Or at least not as slick as a wood deck.

With TimberTech decking composite products, the materials have an anti-slip component that minimizes slipping injuries when the board is wet.

For example, its 4-sided capped composite collections are textured to mimic wood and provide a hand-scraped texture adding friction against water.

Is a Composite Deck Worth the Money?

Yes, a composite deck is worth the money you invest. You don’t simply get to have a durable and high-quality deck; you will also enjoy its textured and aesthetically pleasing look as well.

However, there are still instances wherein homeowners are disappointed by how their composite decks are built. The expectations aren’t met, and the result diminishes the comfort and fun supposedly brought by the deck.

That’s why it is of utmost importance to choose the right decking products and employ deck builders who provide nothing less than quality services.

If you’re living in the Loveland, Colorado area and looking for licensed professionals to help you renovate or build your deck, then let TNT Home Improvements come build your dream deck.

This locally-based company only uses the best decking products like TimberTech to give you a cozy and lavish-looking composite deck.

Conclusion

To build the composite deck of your dreams, don’t settle for less.

A comfortable and well-built deck can be your haven within your home, and nothing can put a price on that.

Savor the benefits of a composite deck and avoid the disadvantages by hiring professional deck builders who know the best materials in the industry.If you are located in the Northern Colorado/ Southern Wyoming area, then give us a call today at 970-663-2868 or visit the deck services page and fill out the contact form to make an appointment to discuss your next home improvement project.

composite decking deck contractor decking professional Timbertech tnt home improvements wood deck